eHealth Infrastructure - Local Development build (v3.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions
Active as of 2024-05-27 |
Definitions for the ehealth-devicemetric resource profile.
Guidance on how to interpret the contents of this table can be found here
0. DeviceMetric | |
2. DeviceMetric.extension | |
Control | 4..? |
Slicing | This element introduces a set of slices on DeviceMetric.extension . The slices are unordered and Open, and can be differentiated using the following discriminators: |
4. DeviceMetric.extension:properties | |
Slice Name | properties |
Control | 0..* |
Type | Extension(Properties) (Complex Extension) |
6. DeviceMetric.extension:qualities | |
Slice Name | qualities |
Control | 1..1 |
Type | Extension(Qualities) (Complex Extension) |
8. DeviceMetric.extension:qualitiyHistory | |
Slice Name | qualitiyHistory |
Control | 0..* |
Type | Extension(Quality history) (Complex Extension) |
10. DeviceMetric.extension:templateQualities | |
Slice Name | templateQualities |
Control | 3..3 |
Type | Extension(Template qualities) (Complex Extension) |
12. DeviceMetric.type | |
Binding | The codes SHALL be taken from Device Measurement Unit (required to http://ehealth.sundhed.dk/vs/device-measurement-unit ) |
14. DeviceMetric.unit | |
Binding | The codes SHALL be taken from Device Measurement Unit (required to http://ehealth.sundhed.dk/vs/device-measurement-unit ) |
16. DeviceMetric.source | |
Control | 1..? |
Type | Reference(ehealth-device)referenced |
18. DeviceMetric.parent | |
Control | 0..0 |
20. DeviceMetric.calibration | |
22. DeviceMetric.calibration.extension | |
Slicing | This element introduces a set of slices on DeviceMetric.calibration.extension . The slices are unordered and Open, and can be differentiated using the following discriminators: |
24. DeviceMetric.calibration.extension:calibrationExpires | |
Slice Name | calibrationExpires |
Control | 0..1 |
Type | Extension(Calibration expires) (Extension Type: dateTime) |
Guidance on how to interpret the contents of this table can be found here
0. DeviceMetric | |
Definition | Describes a measurement, calculation or setting capability of a medical device. |
Short | Measurement, calculation or setting capability of a medical device |
Comments | For the initial scope, this DeviceMetric resource is only applicable to describe a single metric node in the containment tree that is produced by the context scanner in any medical device that implements or derives from the ISO/IEEE 11073 standard. |
Control | 0..* |
Is Modifier | false |
Summary | false |
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists()) |
2. DeviceMetric.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
4. DeviceMetric.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 40..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on DeviceMetric.extension . The slices are unordered and Open, and can be differentiated using the following discriminators: |
6. DeviceMetric.extension:properties | |
Slice Name | properties |
Definition | Properties of this device. Properties are static by nature whereas qualities are dynamic and may change during the life cycle or calibration cycle of a device. |
Short | Properties of the Device |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension(Properties) (Complex Extension) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
8. DeviceMetric.extension:qualities | |
Slice Name | qualities |
Definition | Current device quality |
Short | Qualities of the Device |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Extension(Qualities) (Complex Extension) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
10. DeviceMetric.extension:qualitiyHistory | |
Slice Name | qualitiyHistory |
Definition | History of device quality |
Short | History of device quality |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension(Quality history) (Complex Extension) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
12. DeviceMetric.extension:templateQualities | |
Slice Name | templateQualities |
Definition | Device quality default settings for an initial, a degraded, and an overridden device quality. |
Short | Device quality default settings |
Control | 3..3 This element is affected by the following invariants: ele-1 |
Type | Extension(Template qualities) (Complex Extension) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
14. DeviceMetric.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
Summary | false |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
16. DeviceMetric.type | |
Definition | Describes the type of the metric. For example: Heart Rate, PEEP Setting, etc. |
Short | Identity of metric, for example Heart Rate or PEEP Setting |
Comments | DeviceMetric.type can be referred to either IEEE 11073-10101 or LOINC. |
Control | 1..1 |
Binding | The codes SHALL be taken from The codes SHOULD be taken from Device Measurement Unithttp://hl7.org/fhir/ValueSet/devicemetric-type (required to http://ehealth.sundhed.dk/vs/device-measurement-unit ) |
Type | CodeableConcept |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
18. DeviceMetric.unit | |
Definition | Describes the unit that an observed value determined for this metric will have. For example: Percent, Seconds, etc. |
Short | Unit of Measure for the Metric |
Comments | DeviceMetric.unit can refer to either UCUM or preferable a RTMMS coding system. |
Control | 0..1 |
Binding | The codes SHALL be taken from The codes SHOULD be taken from Device Measurement Unithttp://hl7.org/fhir/ValueSet/devicemetric-type (required to http://ehealth.sundhed.dk/vs/device-measurement-unit ) |
Type | CodeableConcept |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
20. DeviceMetric.source | |
Definition | Describes the link to the Device that this DeviceMetric belongs to and that contains administrative device information such as manufacturer, serial number, etc. |
Short | Describes the link to the source Device |
Control | 10..1 |
Type | Reference(ehealth-device, Device)referenced |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
22. DeviceMetric.parent | |
Definition | Describes the link to the Device that this DeviceMetric belongs to and that provide information about the location of this DeviceMetric in the containment structure of the parent Device. An example would be a Device that represents a Channel. This reference can be used by a client application to distinguish DeviceMetrics that have the same type, but should be interpreted based on their containment location. |
Short | Describes the link to the parent Device |
Control | 0..01 |
Type | Reference(Device) |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
24. DeviceMetric.category | |
Definition | Indicates the category of the observation generation process. A DeviceMetric can be for example a setting, measurement, or calculation. |
Short | measurement | setting | calculation | unspecified |
Control | 1..1 |
Binding | The codes SHALL be taken from DeviceMetricCategoryhttp://hl7.org/fhir/ValueSet/metric-category|4.0.1 (required to http://hl7.org/fhir/ValueSet/metric-category|4.0.1 )Describes the category of the metric. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. DeviceMetric | |||||
Definition | Describes a measurement, calculation or setting capability of a medical device. | ||||
Short | Measurement, calculation or setting capability of a medical device | ||||
Comments | For the initial scope, this DeviceMetric resource is only applicable to describe a single metric node in the containment tree that is produced by the context scanner in any medical device that implements or derives from the ISO/IEEE 11073 standard. | ||||
Control | 0..* | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty() )dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource ( contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() )dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() )dom-5: If a resource is contained in another resource, it SHALL NOT have a security label ( contained.meta.security.empty() )dom-6: A resource should have narrative for robust management ( text.`div`.exists() ) | ||||
2. DeviceMetric.id | |||||
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
Short | Logical id of this artifact | ||||
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
Control | 0..1 | ||||
Type | id | ||||
Is Modifier | false | ||||
Summary | true | ||||
4. DeviceMetric.meta | |||||
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
Short | Metadata about the resource | ||||
Control | 0..1 | ||||
Type | Meta | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
6. DeviceMetric.implicitRules | |||||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
Short | A set of rules under which this content was created | ||||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
8. DeviceMetric.language | |||||
Definition | The base language in which the resource is written. | ||||
Short | Language of the resource content | ||||
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages )A human language.
| ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
10. DeviceMetric.text | |||||
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
Short | Text summary of the resource, for human interpretation | ||||
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. | ||||
Control | 0..1 | ||||
Type | Narrative | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | narrative, html, xhtml, display | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
12. DeviceMetric.contained | |||||
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
Short | Contained, inline Resources | ||||
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. | ||||
Control | 0..* | ||||
Type | Resource | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | inline resources, anonymous resources, contained resources | ||||
14. DeviceMetric.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 4..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on DeviceMetric.extension . The slices are unordered and Open, and can be differentiated using the following discriminators: | ||||
16. DeviceMetric.extension:properties | |||||
Slice Name | properties | ||||
Definition | Properties of this device. Properties are static by nature whereas qualities are dynamic and may change during the life cycle or calibration cycle of a device. | ||||
Short | Properties of the Device | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension(Properties) (Complex Extension) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
18. DeviceMetric.extension:qualities | |||||
Slice Name | qualities | ||||
Definition | Current device quality | ||||
Short | Qualities of the Device | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(Qualities) (Complex Extension) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
20. DeviceMetric.extension:qualitiyHistory | |||||
Slice Name | qualitiyHistory | ||||
Definition | History of device quality | ||||
Short | History of device quality | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension(Quality history) (Complex Extension) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
22. DeviceMetric.extension:templateQualities | |||||
Slice Name | templateQualities | ||||
Definition | Device quality default settings for an initial, a degraded, and an overridden device quality. | ||||
Short | Device quality default settings | ||||
Control | 3..3 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(Template qualities) (Complex Extension) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
24. DeviceMetric.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them | ||||
Summary | false | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
26. DeviceMetric.identifier | |||||
Definition | Unique instance identifiers assigned to a device by the device or gateway software, manufacturers, other organizations or owners. For example: handle ID. | ||||
Short | Instance identifier | ||||
Comments | For identifiers assigned to a device by the device or gateway software, the | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..* | ||||
Type | Identifier | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
28. DeviceMetric.type | |||||
Definition | Describes the type of the metric. For example: Heart Rate, PEEP Setting, etc. | ||||
Short | Identity of metric, for example Heart Rate or PEEP Setting | ||||
Comments | DeviceMetric.type can be referred to either IEEE 11073-10101 or LOINC. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from Device Measurement Unit (required to http://ehealth.sundhed.dk/vs/device-measurement-unit ) | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
30. DeviceMetric.unit | |||||
Definition | Describes the unit that an observed value determined for this metric will have. For example: Percent, Seconds, etc. | ||||
Short | Unit of Measure for the Metric | ||||
Comments | DeviceMetric.unit can refer to either UCUM or preferable a RTMMS coding system. | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from Device Measurement Unit (required to http://ehealth.sundhed.dk/vs/device-measurement-unit ) | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
32. DeviceMetric.source | |||||
Definition | Describes the link to the Device that this DeviceMetric belongs to and that contains administrative device information such as manufacturer, serial number, etc. | ||||
Short | Describes the link to the source Device | ||||
Control | 1..1 | ||||
Type | Reference(ehealth-device)referenced | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
34. DeviceMetric.parent | |||||
Definition | Describes the link to the Device that this DeviceMetric belongs to and that provide information about the location of this DeviceMetric in the containment structure of the parent Device. An example would be a Device that represents a Channel. This reference can be used by a client application to distinguish DeviceMetrics that have the same type, but should be interpreted based on their containment location. | ||||
Short | Describes the link to the parent Device | ||||
Control | 0..0 | ||||
Type | Reference(Device) | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
36. DeviceMetric.operationalStatus | |||||
Definition | Indicates current operational state of the device. For example: On, Off, Standby, etc. | ||||
Short | on | off | standby | entered-in-error | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from DeviceMetricOperationalStatus (required to http://hl7.org/fhir/ValueSet/metric-operational-status|4.0.1 )Describes the operational status of the DeviceMetric. | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
38. DeviceMetric.color | |||||
Definition | Describes the color representation for the metric. This is often used to aid clinicians to track and identify parameter types by color. In practice, consider a Patient Monitor that has ECG/HR and Pleth for example; the parameters are displayed in different characteristic colors, such as HR-blue, BP-green, and PR and SpO2- magenta. | ||||
Short | black | red | green | yellow | blue | magenta | cyan | white | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from DeviceMetricColor (required to http://hl7.org/fhir/ValueSet/metric-color|4.0.1 )Describes the typical color of representation. | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
40. DeviceMetric.category | |||||
Definition | Indicates the category of the observation generation process. A DeviceMetric can be for example a setting, measurement, or calculation. | ||||
Short | measurement | setting | calculation | unspecified | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from DeviceMetricCategory (required to http://hl7.org/fhir/ValueSet/metric-category|4.0.1 )Describes the category of the metric. | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
42. DeviceMetric.measurementPeriod | |||||
Definition | Describes the measurement repetition time. This is not necessarily the same as the update period. The measurement repetition time can range from milliseconds up to hours. An example for a measurement repetition time in the range of milliseconds is the sampling rate of an ECG. An example for a measurement repetition time in the range of hours is a NIBP that is triggered automatically every hour. The update period may be different than the measurement repetition time, if the device does not update the published observed value with the same frequency as it was measured. | ||||
Short | Describes the measurement repetition time | ||||
Control | 0..1 | ||||
Type | Timing | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
44. DeviceMetric.calibration | |||||
Definition | Describes the calibrations that have been performed or that are required to be performed. | ||||
Short | Describes the calibrations that have been performed or that are required to be performed | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
46. DeviceMetric.calibration.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
48. DeviceMetric.calibration.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on DeviceMetric.calibration.extension . The slices are unordered and Open, and can be differentiated using the following discriminators: | ||||
50. DeviceMetric.calibration.extension:calibrationExpires | |||||
Slice Name | calibrationExpires | ||||
Definition | Date when the current calibration expires and recalibration is required. | ||||
Short | Date when the current calibration expires. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(Calibration expires) (Extension Type: dateTime) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
52. DeviceMetric.calibration.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
54. DeviceMetric.calibration.type | |||||
Definition | Describes the type of the calibration method. | ||||
Short | unspecified | offset | gain | two-point | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from DeviceMetricCalibrationType (required to http://hl7.org/fhir/ValueSet/metric-calibration-type|4.0.1 )Describes the type of a metric calibration. | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
56. DeviceMetric.calibration.state | |||||
Definition | Describes the state of the calibration. | ||||
Short | not-calibrated | calibration-required | calibrated | unspecified | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from DeviceMetricCalibrationState (required to http://hl7.org/fhir/ValueSet/metric-calibration-state|4.0.1 )Describes the state of a metric calibration. | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
58. DeviceMetric.calibration.time | |||||
Definition | Describes the time last calibration has been performed. | ||||
Short | Describes the time last calibration has been performed | ||||
Control | 0..1 | ||||
Type | instant | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |